VORAGO 302 V2 Guía Rápida página 19

HOW TO FOLD YOUR SCOOTER
Make sure the scooter is o , hold the front post, loosen a
locking lever, and lower the steering rack. Add a steering
rack in a horizontal position and secure it by inserting a
hook through the special ring, which is located on the rear
wheel fender. To assemble the scooter, loosen the
steering rack lock from a hook on a fender, then raise it to
an upright position and lock the lever.
ADJUST THROTTLE AND BRAKES
1. Loosen the screws for the throttle and electronic brake.
counterclockwise with a 3mm hex wrench and loosen the
hood bolts counterclockwise with a cross wrench.
2. Twist the throttle and electronic brake and adjust to an
angle that can be comfortably operated while driving.
3. Tighten the throttle, electronic brake and bell bolts
clockwise.