Descargar Imprimir esta página

JAROLIFT TDRCT04W Instrucciones Originales página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
PROGRAMMING
ASSIGNMENT OF THE AUTOMATIC UP AND DOWN SWITCHING TIMES (MEMORY LOCATIONS) TO
THE TRANSMITTER CHANNELS
Each automatic up and down switching time can be assigned to a specific channel (individual operation)
or all channels can be assigned simultaneously (group control).
Mo
1
2
3
4
In the main menu
Press the K2 key.
Attention!
When the marking
(framing) of all four
channels is exceeded
by pressing the K3
key, the memory
location changes back
to „deactivated" mode
(--:--).
Then press the K3 key
once more.
The memory location
is reactivated and the
first channel in the
channel display is
marked.
ACTIVATING AND DEACTIVATING THE TIMER FUNCTION
Make sure you are in the main view.
To go to the main view from any menu, briefly press the stop key.
In the main view, press and hold the stop key and briefly press the K2 key to activate or deactivate the timer function.
or deactivate the timer function.
If the timer is active, the alarm clock symbol is displayed in the main view.
Mo
1
2
3
4
28
Mo Tu We Th Fr
1
2
3
4
The switching time (time,
day/s) "UP" programmed for
memory location 1 appears
in the display.The currently
selected channel (1,2,3 or 4)
or all channels (1-4) is/are
outlined.
Mo Tu We Th Fr
1
2
3
4
If the channel(s) for
memory location 1
is "OPEN" is selected
(are), press key K2
to save the setting
press.
Mo
1
2
3
4
-- --
If --:-- is displayed,
no switching time is
programmed or the memory
location is deactivated. Press
the K3 button to activate the
deactivated memory location.
Mo Tu We Th Fr
1
2
3
4
The switching time
programmed for memory
location 1 (time, day/s)
"DOWN" appears in the
display. Press the K3 key
again (repeatedly) again
(repeatedly) to select the
desired channel (1, 2, 3 or
4) for individual control
or individual control or all
channels (1-4) for group
control.select.
Su Mo Tu
We
Th Fr Sa
1
2
3
4
Timer function activated
Mo Tu We Th Fr
1
2
3
4
Press the K3 key again
(repeatedly) to select
the desired channel
(1, 2, 3 or 4) for
individual control or
all channels (1-4) for
group control.
Press the K2 key to
assign the channels
for memory location
2 and others.
Press the STOP key to
save the settings and
exit programming.
exit programming.
Press the STOP key to
exit programming at
any time.
at any time. The last
value set is saved.
Su Mo Tu
We
Th Fr Sa
1
2
3
4
Timer function deactivated
Su Mo Tu We Th Fr Sa
1
2
3
4
Mo
1
2
3
4

Publicidad

loading