TECHNICAL DATA / SCOPE OF DELIVERY / INSERTING THE BATTERY
Technical data
Input voltage:
Transmission frequency:
Working current:
Quiescent current:
Transmit power:
Protection class:
Permissible ambient temperature:
Range:
Channels:
Compatibility:
* Range data are approximate values and depend on the structural conditions.
Scope of delivery
1.
Handheld transmitter incl.
battery
2.
Wall bracket incl.
mounting material
Instruction manual
This product contains a button cell battery. If swallowed, the button cell battery
can cause severe internal burns and death in as little as 2 hours.
Keep new and used batteries away from children. If the battery compartment can-
not be closed securely, stop using the product and keep it away from children. If
you think batteries may have been swallowed or may have entered any part of your
body, seek medical attention immediately.
Inserting the battery / changing the battery
The battery is (depending on the transmitter model) supplied loose or already installed and secured against discharge with a pro-
tective foil discharge with a protective film. Open the rear cover, remove the protective foil and insert the battery with the
into the battery compartment with the + (plus) side facing up.
Then close the battery compartment again.
Use a tool (e.g. sim card pin, mini screwdriver, fine needle) to press the fuse button and slide the battery cover
down.
16
3V battery (type 2430)
433,05 - 434,79 MHz
< 15 mA
< 1 µA
< 10 mW
IP 30
+10°C to +50°C
Open field: approx. 150m* / indoors: approx. 30m*.
1-channel (JMHS-1) | 15 channels (JMHS-15)
JULIUS MAYER Radio Drives & Receivers
Handheld transmitter JMHS-1
or
1
Handheld transmitter JMHS-15
Depending on the frequency of switching opera-
tions, we recommend replacing the battery at least
every 2 years.
2
Wall mount incl.
Mounting material