Parrot Bluegrass Fields Manual De Usuario página 22

CONNECT THE
DRONE TO PARROT
SKYCONTROLLER 2
1. Place Parrot Bluegrass on a flat surface.
2. Press the Parrot Bluegrass power button to turn it on.
3. Press the Parrot Skycontroller 2 power button to turn
it on.
4. Wait until the Parrot Skycontroller 2 indicator light is
steady green.
USING THE INTERNAL MEMORY
OF SEQUOIA
If Sequoia detects an SD card, the shots are saved on this
SD card. If no SD card is detected, Sequoia automatically
saves the shots in the internal memory of the multispectral
sensor.
22