Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Normal phenomena
Button failure
Please check the control board whether the fridge under lock mode.When under lock mode,
all buttons can't work.
Low voltage,the compressor can't start
You should purchase pressurizer of more than 1000W when the area of the appliance
installation,that's better to protect your fridge.
Long time to start
When the ambient temperature too high, it will take long time to start the appliance.
Middle beams feel hot
Middle beams feel hot after a period of time of the appliance run,it belongs to the normal
phenomenon.
Dew drops
When external air flows into the cool inner surface of the fridge,dew drops can be formed.
If the humidity of the installed location is high or during the rainy season,dew drops can
form on the outer side of the fridge.This is a natural phenomenon that occurs during the
humid weather,Wipe the water drops with a dry cloth.
Noise
When you operate the fridge for the first time,the fridge will operate at high speed to cool
fast and the sound can seem louder.When the internal temperature falls below a certain
level,the noise will subside.
When the operation of the compressor is starting or ending;various parts expanding/
contracting or various control devices operating or temperature change within the fridge,you
will hear the sounds,these are normal sounds.
Compressor hot
When working,the temperature of the compressor
outer
is more than
80℃,please do not
touch the compressor,it may cuase serious injury.
Compressor long time running
When the ambient temperature too high or put too much fresh foods into the fridge,it will
take long time to cool down until the appliance run at the setting temperature.
- 20 -
Publicidad
