Publicidad
Idiomas disponibles
Idiomas disponibles
English
Installation
Note: Please use short length and high-quality cables, especially for higher
resolutions.
Function 1
1.
For the installation of the hardware all devices should be turned off.
2.
Connect all video sources and the switch ports 1 + 2 with optional cables.
3.
Connect the switch to your display with an optional cable.
4.
Turn on all connected devices.
5.
By using the button on the top you can switch between the different video
sources.
Function 2
1.
For the installation of the hardware all devices should be turned off.
2.
Connect all displays and the switch ports 1 + 2 with optional cables.
3.
Connect the switch to your video source with an optional cable.
4.
Turn on all connected devices.
5.
By using the button on the top you can switch between the different displays.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 04/2021
-3-
Publicidad
