Walker Magnetics CER05 Manual De Operaciones página 4

SAFETY INSTRUCTIONS (
Danger always exists when loads are transported by lifting devices, especially when the equipment
is not being used properly or is poorly maintained. Special safety precautions apply to the operation,
inspection, and maintenance of the Walker Lift Magnets.
Proper lifting knowledge and techniques are the responsibility of the operator. Be sure to read and
understand the instructions and safety warnings contained in this manual before using the magnet.
UNSAFE LIFTING APPLICATIONS FOR CER MAGNETS
Walker Magnetics can provide other type magnets for these applications.
For Model CER type magnets see Lifting Guidelines on Page 13 & 14.
4 of 66
CONTINUED
Never lift any pipe, solid round or structural shapes
with this magnet.
Never lift any castings that do not have a machined
fl at lifting surface for the magnet. The location of the
lifting surface should be such to permit the load to
remain level when lifted.
WARNING
)
DANGER
DANGER
Never lift a load by its narrowest dimension.
If there is any diffi culty lifting a load, DO NOT LIFT IT!
Call Walker for advice at 1-800-WMAGNET
800-WMAGNET