Metra 95-7383 Instrucciones De Instalación página 5

Secure the radio to the radio brackets
1.
using the screws supplied with the
radio. (Figure A)
Locate the factory wiring harness and
2.
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
3. Secure the completed assembly into the
dash using the factory screws.
Reassemble the dash in reverse
4.
order of disassembly to complete the
installation.
KIT ASSEMBLY
(Figure A)
5
REV. 1/6/2022 INST95-7383