Publicidad
Idiomas disponibles
Idiomas disponibles
EN
DESCRIPCIÓN
LED flat PAR RGBW spotlight.
Operation in automatic, manual (colour and strobe adjustment), sound activation, DMX control, master/slave
mode.
CONTROLS AND FUNCTIONS
REAR PANEL
1.-
SCREEN: shows the current mode of operation of the device.
2.-
MENU: allows you to change the mode of operation.
3.-
UP/DOWN: increases/decreases the value of the selected mode. To confirm the selection, press
ENTER.
4.-
ENTER: confirms the current value of the configured parameter.
5.-
POWER IN: 100-240 V AC power supply.
6.-
DMX OUT: control signal output, 3 pin XLR connector.
7.-
DMX IN: control signal input, 3 pin XLR connector.
CONNECTION AND OPERATION
Select the operation mode by pressing the MODE buttons. To make changes within a mode use the SET
buttons and press ENTER to confirm.
The following table shows you all the operating modes and the possible settings for each mode.
MODE
A - - -
DMX
CONTROL
d - - -
r - - -
G - - -
b - - -
MANUAL
u - - -
FH - -
CL - -
CC - -
AUTO
dE - -
CP - -
SOUND
SU - -
VALUE
001-512
001-512
000-255
Create color by mixing intensities of red (r - - -), green (G - - -), blue (b- - -) and
000-255
000-255
Value: color intensity (000: minimum, 255: maximum)
000-255
01-99
White strobe light. Value: speed (01: slow, 99: very fast)
00-08
01-99
01-99
01-99
00-08
Sound activated. Value: led time ON (01: short, ~3 sec)
FUNCTION
8 channel DMX control. Value: DMX address
4 channel DMX control. Value: DMX address
white (u - - -).
Preset fixed colours. Value: colour
Effect 1. Value: speed (01: slow, 99: very fast)
Effect 2. Value: speed (01: slow, 99: very fast)
Effect 3. Value: speed (01: slow, 99: very fast)
- 2 -
Publicidad
