VR46 MOTOR BIKE-X Manual De Usuario página 17

Problem
The motor is overheating
The drive wheel does not turn
The motor stops while it is running
After charging it, the item does not switch
on or it switches off after a few km..
The battery does not charge or the product
does not turn on
11. Troubleshooting
Cause
Excessive operating temperature
Motor anomaly
Brake sensor malfunction
Motor is blocked
Motor overheating
Damaged battery
Electrical problem
Charger damaged
Cables and wires
16
Solution
Do not touch it and let it cool for at least 30 minutes
before restarting the system
Request technical assistance
A faulty brake sensor can cause the bicycle to stop
inadvertently.
Check and, if necessary, clean the brake lever slot
with a brush.
Make sure that the brake cable returns smoothly to
its original position after each braking. If the problem
persists, request technical assistance.
Request technical assistance
Stop the vehicle and wait for it to cool down for at
least 30 minutes.
Request technical assistance
Request technical assistance
Request technical assistance
Replace the charger. Request technical assistance.
Internal loosening of cables and wires could also be
a cause of this problem. Contact your local dealer to
resolve the problem.