Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Prior to Unpacking the Product:
Make sure that the electric installation is proper. If you are not certain, call a
qualified electrician and cause the required arrangements are performed by him.
Preparation of the installation site as well as the electric installation is for
responsibility of the customer.
For installation of the product, the rules related to power as specified by the local
standards should be observed.
Control whether the product has any damage prior to installation of it. If the product
is defective, do not install it. Otherwise the defective product may pose risk for
safety.
The room should be ventilated well for safe operation of the product.
If there is no window for ventilation of the room, you should provide an extra
ventilation (vent on the window pane, etc.). If there is vent in your kitchen, never
block it.
Inspect condition of other materials inside the hood (e.g. installation accessories,
operating manual) in the carton box and remove and keep them in a separate place.
Never keep them in the hood.
Do not install the product on such surfaces as tile, gloss or silicon. Fix it on the wall
only.
Do not allow the children to play with the packaging materials!!!
INSTALLATION AND ACCESSORIES
14
Publicidad
