Descargar Imprimir esta página

POWER SMITH PWLR010CM Manual Del Operario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS
Always unplug the charger/adaptor from the light
and power source when not in use.
Do not look directly at the lighted lamps to avoid eye
injuries.
Always keep the work light away from any flammable
surface or materials.
Always check damaged or worn-out parts before
using the work light. Broken parts will affect the work
light operation. Replace or repair damaged or worn parts
immediately. If repairs are needed, consult a professional
electrician.
Do not use a pressure washer to clean this product.
Do not modify the work light in any way. Unauthorized
modification may impair the function and/or safety and
could affect the life of the product. There are specific
applications for which the work light was designed.
Store work light in a secure place out of the reach of
children. Inspect it for good working condition prior to
storage and before re-use.
WaRnInG:
a Lithium-ion battery. Lithium-ion batteries are small,
compact, and ideal for providing long-lasting power to
this product. However, they must be used and charged
properly. Improper use can result in serious injury, fire,
or death.
caUtIon:
This product comes with a battery
installed internally. Do not attempt to remove the battery
from the product.
Do not place this lithium-ion battery-powered product in
fire or apply heat to it.
Do not apply strong impact or shocks to this lithium-ion
battery-powered product.
Do not allow the lithium-ion battery to get wet.
Do not leave this lithium-ion battery-powered product in
the direct sunlight, or use or store it inside cars in hot
weather. Doing so may cause the battery to generate
heat, rupture, or ignite. Using the battery in this manner
may also result in a loss of performance and a shortened
battery life.
NEVER THROW WATER ON A BURNING LITHIUM-ION
BATTERY! If a lithium-ion battery does catch on fire, it
will burn even more violently when contacted with water.
Store the product at temperatures between 41°F and
77°F (5°C and 25°C).
Properly dispose of all batteries at a recycling center
or per local code. More information regarding battery
disposal in U.S. and Canada is available at; http://www.
rbrc.org/index.html, or by calling 1-800-822-8837
(1-800-8BATTER).
OPERATION
CHARGING THE LIGHT
The light can be recharged by connecting the included USB
charging cable to a USB power output, such as a cellular
phone power adaptor or laptop USB port.
1. Make sure the light is turned off.
2. Lift the clear cover (3) to access the charging port (5).
3. Connect the USB-C (small) end of the charging cable to
the charging port and connect the USB end to a standard
5V USB power output.
This LED light is powered by
English
4. The battery power Indicator lights (6) will illuminate blue
to display the battery power level. One of the indicator
lights will be flashing if charging is in progress.
5. When charging is complete, all four indicator lights will
be solid blue.
SwITCH BuTToN
Press the switch button (4) to turn the light On. Additional
presses cycle through the light settings in the following
sequence.
High - Medium - Low - Off
If the light is left on any setting for more than 10 seconds,
the next press of the switch button will turn the light off.
BATTERY PowER INDICAToR
The light has a battery power indicator (6). It consists of 4
blue lights. To indicate the battery power level, power the
light on. More illuminated blue lights indicate more battery
power remaining.
uSB PowER ouTPuT
The light has a USB power output (7) to charge other
portable devices using the appropriate USB cable.
LED LIGHT PANEL
The light panel (1) swivels on a ball joint (8) for additional
versatility in light positioning. It folds for easy transportation
and storage.
MAGNETIC CLAMP BASE
This light features a magnetic clamp base (2) with a
hanging hook (10) and a keyhole slot (11). It can be
clamped to an object as thick as 1-1/2". Refer to FIG 2 for
application examples.
WaRnInG:
unplugged and completely cool before attempting to
clean it.
Your light requires very little care and maintenance. Simply
clean the lens regularly with a non-abrasive cleaner.
This product is warranted free from defects in material
and workmanship for 2 (tWo) years after date of purchase.
This limited warranty does not cover normal wear and tear
or damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith™
product,
Please call Toll-Free:
Or visit our website:
www.
powersmithproducts.com
3
OPERATION
MAINTENANCE
Always make sure the light is
WARRANTY
HELP LINE
888-552-8665.

Publicidad

loading