BS BATTERY BST 1000 Manual De Usuario página 6

Once the battery tester is well connected to the battery, the display will light on to indicate
tester version and battery voltage.
Tester will display the following contents after press any key.
• Battery test:
• Select Battery Type
After the battery test selected, the battery tester will prompt to select battery type,
i.e. Regular Flooded, Lithium Ion ,AGM Flat Plate, AGM Spiral, Gel and EFB battery.
Press UP/DOWN key to select battery type, then press ENTER key to confirm.
1.Car
2.Motorcycle
6
Voltmeter:
12.40V
Main Menu
1.Battery Test
2.Cranking Test
3.Charging Test
4.Review Data
5.Print Data
6.System Setup
Type
Battery System Standard and Rating: the battery
tester will test each battery according to the selected
system and rating.
Use UP/DOWN key to select according to the actual
system standard and rating marked on the battery.
See in the below picture, the arrow indicated location.
Battery Type
1.Flooded
2.AGM Flat Plate
3.AGM Spiral Plate
4.GEL
5.EFB
Battery Type
1.Flooded
2.Lithium Ion
3.AGM
4.GEL