Descargar Imprimir esta página

BS BATTERY BST 1000 Manual De Usuario página 7

Ocultar thumbs Ver también para BST 1000:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Select Input
CCA
1/10
It takes around 3 seconds to display the battery test result.
BATTERY TEST RESULT
Battery test result includes 5 types as following:
Healthy >60%
Healthy >60%
Healthy <60%
Healthy <60%
Healthy = 0
1. GOOD BATTERY
Healthy: 96%
Charge: 98%
Internal R = 6.1mΩ
Rated: 500A
Battery OK
3. REPLACE
Healthy: 46%
Charge: 8 0%
Internal R = 18.1mΩ
Rated: 500A
Replace
5. CHARGE, RETEST
Healthy: 39%
Charge: 20%
Internal R = 30.1mΩ
Rated: 500A
Charge & retest
CRANKING TEST
Cranking test is the Engine ignition test. This test allows to check if the battery can provide
enough power to start the engine. It tests the battery instant voltage once start the engine.
If cranking voltage value is lower than 9.6V, the result is considered as abnormal.
If the result is higher than 9.6V, the result is considered as Normal.
| www.bs-battery.com
Voltage >12.4V
Voltage <12.4V
Voltage >12.4V
Voltage <12.4V
Voltage <12.4V,
Electric Current = 0A or 0 CCA
490CCA
12.64V
490CCA
12.68V
310CCA
12.08V
Setting Rate
500 CCA
Good battery
Good, Recharge
Replace
Charge, Retest
Bad cell , replace
2. GOOD, RECHARGE
Healthy: 78%
Charge: 30%
Internal R = 7.2mΩ
Rated: 500A
Good, Recharge
4. BAD CELL, REPLACE
Healthy: 0%
Charge: 20%
Internal R = 45.2mΩ
Rated: 500A
Damaged , Replace
440CCA
12.20V
0CCA
10.64V
7

Publicidad

loading