Dörr VL-12 S Manual De Instrucciones página 7

02 | PRODUCT DESCRIPTION
Ultra-flat LED continuous light for photo and video recordings
•
For DSLR, DSLM & camcorder with hot shoe mount and Smartphones
•
(with optional Smartphone holder)
Brightness dimmable in 8 steps
•
Supplied with universal flash shoe, Smartphone screw adapter ¼",
•
USB charging cable, 3 diffusor plates (white, orange, blue)
03 | NOMENCLATURE
1 ¼ " thread mount
2 Notches for di usor plate
2a) long notch
2b) 2x short notches
3 Battery charging and capacity indicator
4 On/O button
5 Button + (brightness lighter)
6 Button – (brightness darker)
7 Micro USB port
8 Universal fl ash shoe
8a) Locking screw
9 Smartphone screw adapter ¼"
9a) Locking screw
10 Di usor plates
11 USB charging cable
11a) Micro USB plug
11b) USB plug
04 | CHARGING THE BUILT-IN LI-ION BATTERY
04.1 BEFORE FIRST USE, PLEASE FULLY CHARGE THE BUILT-IN LI-ION BATTERY:
Insert the Micro USB plug (11a) of the supplied USB charging cable (11) into the Micro USB
port (7) of the LED video light. Connect the USB plug (11b) to an USB port of your computer.
While charging, the battery charging and capacity indicator (3) is fl ashing red. When
battery is fully charged, the battery charging and capacity indicator (3) lights up red per-
manently.
Remove the USB cable from your computer and from the LED video light.
If battery is fully discharged, the charging time via PC is about 2 hours.
04.2 CAPACITY INDICATOR
To check the remaining battery power, press the on/o button (4) briefl y. The charging
and capacity indicator (3) shows the remaining energy in 4 steps (25%, 50%, 75%, 100%).
If remaining power is at 25%, please charge the battery soon.
If LED video light is not in use for a long period of time, we recommend to charge the bat-
tery to about 75% to avoid deep-discharge of battery.
4
3 2b
5
6
7
8 a
10
7
2a
1 2b
8 9
9a
11a
11
11b