Technical Specifications - Dörr VL-12 S Manual De Instrucciones

Kit de luz continua led para video
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

05 | MOUNTING
05.1
MOUNTING ON A CAMERA/CAMCORDER WITH FLASH HOT SHOE
For mounting on your camera or camcorder, screw the universal fl ash shoe (8) into the ¼ "
thread mount (1) of the LED video light.
Slide the universal fl ash shoe (8) in the hot shoe mount of your camera or your camcorder.
Turn down the locking screw (8a) to lock the LED video light tight
05.2
MOUNTING/CHANGING THE DIFFUSOR PLATES
For mounting on your smartphone, a smartphone holder with ¼" thread mount is needed
(optional from DÖRR in retail shops available).
Screw the supplied smartphone screw adapter ¼" (9) into the ¼ " thread mount (1) of
the LED video light. Screw the LED video light onto the smartphone holder. Tighten the
locking screw (9a).
05.3
MOUNTING/CHANGING THE DIFFUSOR PLATES
To remove the di user plate (10), fi rst push the di user plate out of the long notch (2a).
Now the di user plate can be removed.
To attach the di user plate, insert the di user plate into the 2 short notches (2b) fi rst and
then press the di user plate until it snaps into the long notch (2a).
o ers soft light, reduces harsh shadows
White di usor plate
Orange di usor plate
o ers warm light
reduces yellowness in tungsten light
Blue di usor plate
06 | OPERATION
To turn on the LED video light, press and hold the on/o button (4) for about 3 seconds.
To reduce the brightness, press the button – (6) repeatedly, until desired brightness is
achieved.
To increase the brightness, press the button + (5) repeatedly, until desired brightness is
achieved.
The brightness can be adjusted in 8 steps.
To turn o the LED video light, press and hold the on/o button (4) for about 3 seconds.
07 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a
soft, slightly damp microfi ber cloth to clean the outer parts of the device. Before cleaning
make sure to switch o the device and take o from power supply! Store the device in a
dust-free, dry and cool place. This device is not a toy – keep it out of reach of children.
Keep away from pets.

08 | TECHNICAL SPECIFICATIONS

Number of LEDs
Colour temperature
Illuminance approx.
Colour Rendering Index (CRI)
Power supply
Runtime highest level
Runtime lowest level
(with fully charged battery)
Charging time via PC
Charging current/voltage
Operating current
Operating voltage
Dimensions
Weight
09 | SCOPE OF DELIVERY
1x VL-12 LED video light
1x Universal fl ash shoe
1x Smartphone screw adapter ¼"
1x USB charging cable
3x Di usor plates (white, orange, blue)
1x Safety hints
8
12
5600 K +/- 300 K
800 Lux/0,5 m | 140 Lux/1 m
> 95
3.7V, 1000 mA
Built-in Lithium Ion battery
approx. 1 hour
up to 18 hours
approx. 2 hours
600 mA, 5 V
800 mA
3.7 - 4.2 V
approx. 85 x 75 x 15 mm
approx. 70 g

Publicidad

Tabla de contenido
loading

Tabla de contenido