ARVA EVO4 Guía De Utilización página 6

GROUP CHECK
• The Group Check function allows the
group leader to verify that all other
transceivers are working properly.
• To enter Group Check mode, press
the marking button within 5 seconds
after turning on the device (in transmit
mode).
• The device will verify all transmitting
signals within a 0.5 to 1.5 meter radius,
and emit a beep to confirm that they
function properly.
• To exit Group Check mode, press the
marking button.
SEARCH MODE
To switch to search mode, push the
S/T button up with your thumb.
SIGNAL SEARCH
Start searching for a signal based on one
of the two diagrams below.
To maximize the range of your ARVA :
It is important to point your ARVA in the
direction of the avalanche, parallel to the
slope and not pointing upwards towards
the sky.
Slowly rotate back and
forth to try to detect the
signal(s).
EN
5