KURIL Km260 V2 Manual De Usuario página 10

ASSEMBLING
To assemble check the technical descriptions and make sure:
1. That the filter grids are placed correctly.
2. That the safety pin is positioned correctly.
3. That the body of the motor is perfectly fitted in the hopper.
4. That the power supply is 220 V.
5. Be sure not to use the mill without load (empty).
OPERATION
Before operating, make sure:
1. That the motor is plugged into a power source.
2. That the Hopper is not empty.
3. That the intake cereal channel is opened.
MAINTENANCE
It does not require any maintenance beyond the strictly hygienic ones.
ASSISTANCE
In the event of a break down, please refer to an authorized dealer and request origi-
nal spare parts.
GENIUNE PARTS
Some parts may wear out with use and should be replaced with original spare parts.
ATTENTION
It is strictly forbidden to make any unauthorized modifications to the mill without the
manufactures permission.
Failure to comply with this observation can compromise the safety of the equipment
and the immediate loss of the warranty.