Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
Important safeguards
Cleaning
Safety messages
Service
2. INTRODUCTION
3. QUICK START GUIDE
4. USER OPERATIONS
1. SAFETY INSTRUCTIONS
THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO
GBC. IMPORTANT SAFETY MESSAGES AND INFORMATION ARE
CONTAINED IN THIS MANUAL AS WELL AS ON THE MACHINE
ITSELF. PLEASE MAKE SURE YOU CAREFULLY READ AND
UNDERSTAND ALL
OF
THESE
MACHINE.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS OPERATION INSTRUCTIONS MANUAL.
THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS.
THE
FOLLOWING
PICTORIAL IS
FUNCTION PROFESSIONAL PUNCHER - C1 (MFPP-C1)
This safety symbol means that you might
get seriously hurt or killed if you open the
product and expose yourself to hazardous
voltage. NEVER remove the screwed-on
covers. ALWAYS refer service requirements to
qualified service personnel.
3
3
3
4
4
4
5
6
BEFORE
OPERATING
THE
FOUND
ON
THEMULTI
5. USER DISPLAY OPERATION CONTROLS
6. PROBLEM SOLVING
7. SPECIFICATIONS
8. DIE SET USER MANUAL
Important safeguards
♦
Use the Multi Function Professional Puncher - C1 (MFPP-C1) only
for its intended purpose of punching, creasing, & perforating paper
and covers according to the indicated specifications.
♦
Retain the Operation Instructions manual for future use.
CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT
CUT OFF POWER FROM THE DEVICE.
♦
The MFPP-C1 must be connected to a supply voltage corresponding
to the electrical rating of the machine operation instructions (also
listed on the serial number label).
♦
The grounding plug is a safety feature and will only fit into the
proper grounding-type power outlet. If you are unable to insert the
plug into an outlet, contact a qualified electrician to have a suitable
outlet installed.
Do not alter the plug on the end of the cordset (if provided) of the
♦
MFPP-C1. It is provided for your safety.
Unplug the MFPP-C1 before moving the machine or whenever the
♦
machine is not in use for an extended period.
♦
Do not operate the MFPP-C1 if the machine has a damaged
power supply cord or plug. Do not operate the machine after any
malfunction. Do not operate the machine in case of liquid spills, or
if the machine has been damaged in any other way.
♦
Do not overload electrical outlets beyond their capacity. To do so
may result in fire or electrical shock.
Cleaning
♦
You may clean the exterior of the MFPP-C1 using a soft, damp
cloth.
♦
Do not use detergents or solvents as damage to the machine may
occur.
MFPP-C1
GB
7
9
9
11
3
Publicidad
