Iluminarc ILUMIPANEL ML Guía De Referencia Rápida página 3

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–277 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
DMX Linking
The Ilumipanel ML will work with a DMX controller using a standard DMX serial connection. A DMX Primer is available
from www.iluminarc.com.
DMX Connection
The Ilumipanel ML provides a DMX 512 connection using bare-ended IP66-rated signal cable. This cable comes connected
to the product. See the User Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer, as not all DMX controllers
have this capability. The Ilumipanel ML supports RDM protocol that allows feedback to make changes to menu map options.
Ilumipanel ML QRG Rev. 6
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
RDM2Go
Wire (Europe)
Brown
Blue
Green/Yellow
EN
Screw Color
Yellow/Brass
Silver
Green
2