Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7a. Pass canopy (A) over the long machine
screws (DD) protruding from the mounting
bracket (B) and secure in place with
threaded knobs (CC).
NOTE: The outer edge of an outlet box should
be flush with the outer surface of a wall.
However, many outlet boxes are recessed
into the wall. The long machine screws (DD)
are designed to have extra length to
accommodate to various box depths.
7b.1) The long machine screws (DD) may, at
first, protrude too far past the surface of the
canopy (A).
2) Screw the threaded knobs (CC) onto the
long machine screws (DD). The screws will
back thread into the mounting bracket (B)
until the canopy (A) is tight against the wall.
Hardware Used
Threaded Knobs
CC
7a
7b
x 2
7
A
DD
B
DD
B
CC
A
CC
1
2
Publicidad
