Publicidad
• For belt and chain drive applications, verify that the
centers of the drive and driven pulleys and/or sprockets
are aligned with each other as shown.
• Proper alignment and mounting will reduce motor
noise and workload vibration.
CAUTION
• To perform the wiring, make sure
that the lines are not energized.
• Remove the rear cover (A) to access the connection
panel.
• Make the connections according to the voltage
configuration that best suits your needs.
Voltage configuration
115 Volts
Black
Blue
Red
Orange
Brown
White
Direction of rotation configuration
• When using any of the configurations shown above,
the motor shaft rotates clockwise as viewed from the
connection panel. To reverse counterclockwise rotation:
interchange the red and brown wires.
8
ENGLISH
Ground
1
Line 1
2
3
Line 2
4
Mounting
Connections
A
230 Volts
Black
Blue
2
Red
Orange
3
Brown
White
Ground
1
Line 1
Line 2
4
Publicidad
