9.2.7
CALENDAR (CAL) FUNCTIONS
Calendar functions lets PLAYER execute automated functions on a date/time. There are 24
different calendar events available.
Functions
Function:
CAL_reload(nIndex)
Description:
Reload calendar configuration. Call it after modify the calendar configuration using
and CFG_commit
Arguments:
nIndex – number indicating the calendar to reload (1 to 24)
9.2.7.1 CALENDAR VARIABLES
calendarNN.settings.general_description
calendar01.settings.bEnabled
calendarNN.settings.source_start_date
calendarNN.settings.source_start_time
calendar.settings.source_end_enable
calendarNN.settings.source_end_date
calendarNN.settings.source_end_time
calendarNN.settings.source_week_nonactive Week mask where calendar is not active. Should be
calendarNN.settings.source_repeat_enable
calendarNN.settings.source_repeat_interval If repeat is enabled this parameter indicates the
calendarNN.settings.source_repeat_times
calendarNN.settings.target_type
calendarNN.settings.target_preset
calendarNN.settings.target_transport
calendarNN.settings.target_loadsource
Calendar name or description
Set to 1 to enable this calendar
Start date (YYYY/MM/DD). Could be blank
Start time (HH:MM). Could be blank.
Could be FOREVER or CUSTOM END DATE
If CUSTOM END DATE is selected put here the
calendar end date (YYYY/MM/DD)
If CUSTOM END DATE is selected put here the
calendar end
time (HH:MM)
a string of days. Each day is represented by his 2
first letters (MoTuWeThFrSaSu)
1 indicates that the calendar must repeat the
selected interval time up to the number indicated in
times variable. 0 no repetition
repetition time
If repeat is enalbed this parameter indicates the
repetition's number
INTERNAL, PRESET RECALL, TRANSPORT
CONTROL, LOAD & PLAY SOURCE or PRIORITY
SOURCE
If target_type=PRESET RECALL put here the
preset number 1 to 20
If target_type=TRANSPORT CONTROL enter here
one of this options: STOP, PLAY, PREV/RW,
NEXT/FW
if target_type=LOAD & PLAY SOURCE or
target=PRIORITY SOURCE put here the url you
want to load and play
CFG_set
SW
112