TDK-Lambda ZWX Serie Manual De Instrucciones página 14

BEFORE USING THE POWER SUPPLY UNIT
Be sure to read this instruction manual thoroughly before using this product.
Pay attention to all cautions and warnings before using this product.
Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
DANGER
Never use this product in locations where flammable gas or ignitable substances are present. When a spark is generated, there are risks of igniting these
substances and exploding.
WARNING
·
This product is primarily designed and manufactured as Class 1 equipment. In the interest of safety, connect to earth before using the product.
·
Do not touch this product and the internal components in operation or shortly after shut down. They may have high voltage or high temperature and as
the product dissipates its heat so the surface of the product is hot. You may receive electric shock or burn.
·
When this product is operating, keep your hands and face away from it as you may be injured by flying debris in the event of a fault.
·
Do not make unauthorized changes to this product, otherwise you may receive electric shock and void your warranty.
·
Do not drop or insert anything into this product. It might lead to a failure, fire and/or electric shock.
·
Do not operate this product after it falls down.
·
Do not use this product in the event of the emission of smoke or abnormal smell and sound etc. It might lead to fire and/or electric shock. In such cases,
please contact us. Do not attempt repair by yourself, as it is dangerous for the user.
·
Do not operate this product in the presence of condensation. It might lead to fire and/or electric shock.
CAUTION
·
This power supply is designed for use within an end product.
·
Confirm connections to input/output terminals and signal terminals are correct as indicated in the instruction manual before switching on.
·
Input voltage, Output current, Output power, ambient temperature and ambient humidity should be kept within specifications, otherwise the product
will be damaged.
·
Do not operate and store this product in an environment where condensation might occur. In such case, waterproof treatment is necessary.
·
Do not use this product in environment with a strong electromagnetic field, corrosive gas or conductive substances.
·
For applications which require very high reliability (Nuclear related equipment, traffic control equipment, medical equipment, etc.), it is necessary to
provide a fail-safe mechanism in the end equipment.
·
Do not inject abnormal voltages into the output or signal of this product. The injection of reverse voltage or over voltage exceeding nominal output
voltage into the output or signal terminals might cause damage to internal components.
·
Never operate the product under over current or short-circuit conditions for more than 30 seconds, or outside its specified Input Voltage Range.
Insulation failure, smoking, burning or other damage may occur.
·
This product contains a printed circuit board utilizing surface mounted devices. PCB stress such as bending, twisting etc. could cause damage.
Therefore, please handle with care.
·
When handling this product, hold the board edge and take not to touch the component side. When installing this product in apparatus or equipment,
mount it on spacers.
·
The output of this product is considered to be a hazardous energy level (The voltage is 2V or more and the power is 240VA or more). It must not be
made accessible to users. Protection must be provided for Service Engineers against indirect contact with the output terminals and/or to prevent tools
being dropped across them. While working on this product, the AC input power must be switched off and the input and output voltage should be zero.
·
When using for personal computer (hereinafter called PC), cut input voltage with you may stop PC. When the AC switch is cut while PC is operating,
PC might be damaged. Especially, when the AC switch is cut while the memory such as hard disks is operating, you may damage data in a PC.
·
This product has used Power Thermistor to protect the circuit from Inrush Current. Frequent repetition of input might cause damage to internal
components because of generating surge current.
·
Breaking of internal fuse is considered internal failure. In such cases, please contact us.
·
The information in this document is subject to change without prior notice. Please refer to the latest version of the data sheet, etc., for the most up-to
date specifications of the product.
·
No part of this document may be copied or reproduced in any form without prior written consent of Densei-Lambda.
Note: CE MARKING
CE Marking, when applied to a product covered by this handbook, indicates compliance with the low voltage directive.
-1-
TDK-Lambda
ＺＷＸ Series
Instruction Manual