TDK-Lambda ZWX Serie Manual De Instrucciones página 15

1． Model name identification method
ZWX 180 / □
2．Terminal Explanation
2-1．ZWX180, ZWX240 and ZWX300 Terminal Explanation
ZWX180
②
CN1
①
②
① Input Terminal: CN1 (Refer to 2-2.)
② Mounting hole : hole diameter : φ3.5mm
This hole is connected to Protective Earth of CN1.
Must be connected to electrically conductive spacer.
The mounting surface of the spacer should be within Maxφ8mm.
③ Mounting hole : hole diameter : φ3.5mm
This hole is not connected to Protective Earth of CN1.
④ Output Terminal : CN21（+3.3V, +5V and -12V）(Refer to 2-3.)
⑤ Output Terminal : CN31（+3.3V, +5V, +12V, -12V, 5V SB and +3.3Vsense）(Refer to 2-3.)
⑥ Signal Terminal : CN41（PS_ON and PWR_OK）(Refer to 2-3.)
Option (*1)
Rated Output Voltage
Series Name
T3
T2
-2-
TDK-Lambda
ＺＷＸ Series
Instruction Manual
(*1)
Blank : Standard type.
/L1 : With chassis model.
/L2 : With chassis model.
/A1 : With chassis and cover model.
/A2 : With chassis and cover model.
(Refer to 6-2. Output Derating for details of
CN41
CN31
CN21
option model.)
③
⑥
⑤
④
②