2
STEP
ND
According
to
button you wish to
pair, click A, B, C or
D to start PAIRING.
ON THE BLIND COMMAND
3
STEP
RD
To select the desired
function, click on
the function selec-
tion button 1 contin-
uously.
the
2.1 - The LED A
continues to blink and
all the devices in the
network blink as well.
Nota: In the case of bat-
tery powered devices (Ref.
40227), the LED does not
blink in order to extend the
battery's life.
3.1 - LEDs indicate
the function:
Up blind
-
LEVEL - Put the
blind at a level
- Down blind
|LEVEL|
OFF - No PAIRING
Note: When the function LEV-
EL is selected, the PAIRING
stays set at the Blind's level.
25