Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 Usage warnings
•
People using a chainsaw for the first time must first perform the necessary cutting exercises on a
tripod.
•
The chainsaw may bounce if it encounters an object that is too hard or if the bar suddenly jams or
stops.
•
When the bar is used for cutting from top to bottom, the tension direction of the saw is opposite
to the operator.
•
When the guide plate is used for a bottom-up cut, the pushing direction of the saw is towards the
operator. Not recommendable.
•
Do not overload the tool, select a suitable tool for the purpose. Make work safer and more efficient.
•
Do not use the tool if the switch does not work properly. The tool must be repaired if the switch
does not work properly.
•
Disconnect the battery from the tool before making adjustments, repairs and before putting the tool
away. This will reduce the risk of inadvertent tool implementation.
•
Keep the tool away from children, do not allow untrained or inexperienced people to use this tool.
•
Perform tool maintenance. Check the tool and moving parts, damaged components can cause
accidents and injuries. Proper maintenance of the tool can reduce the risk of accidents.
•
Keep the chain clean and regularly oiled. This makes the tool more controllable and reduces the
risk of tool locking.
•
Do not operate the chainsaw above shoulder height.
•
Read the manual before using the tool, select the tool and accessories correctly to avoid accidents.
30
Publicidad
