Publicidad
Idiomas disponibles
Idiomas disponibles
Sound pressure level: < 70 dB(A)
o Tool safety requirements
The chainsaw is safe if it meets the following requirements:
1. The chain is not damaged and lubrication
works properly.
2. La The chain tension is correct.
3. The bar is not deformed.
4. The bar slot is intact.
5. The chainsaw is clean and dry.
6. The handle and the second handle are
intact.
7. The safety switch and the trigger work
properly.
4 Intended use
The tool is designed for pruning branches only.
A different use than indicated can damage the tool and cause accidents.
The tool is designed for adult use only, do not use in rainy weather or to work on wet plants or bushes.
The manufacturer is not responsible for damages caused by the non-observance of the instructions in
this manual.
Check the correct tension and sharp of the chain before using the tool.
Damages caused by the use of not sharpened and / or incorrectly tensioned chain are not covered by
the warranty.
5 Description of the features
The tool is suitable for pruning branches and cutting small diameter trees. It allows two-handed use due
to the double handle, which allows to work safely. It is recommended to comply with the warnings
contained in this user manual.
In case of danger or malfunction release the trigger, the chain will stop to prevent damage or injuries.
Max vibration during use: < 2.5 m/s
8. The control circuit is working properly
and has not been modified.
9. Lubrication works properly.
10. The depth of the slot of the tooth
between the wheel and chain does not
exceed 0.5mm.
11. Bar and chain are assembled correctly as
specified in this manual.
12. Any accessories used are conform and
original.
13. The oil cap is closed.
2
34
Publicidad
