Rega io Manual De Instrucciones página 7

7
Front panel controls
7. On/Off Switch - The power switch to the left of the control panel turns the amplifier on and off. The io is on when the switch is depressed
and off when it is out. The Rega logo will illuminate red when the switch is on and the product is supplied with power, indicating that the
power supply is operational. Please refer to the diagram below.
Off On
Several seconds after turning on you may hear a gentle click, indicating that the switch-on relay has been released and the amplifier is
ready for use. Always allow the io to fully power down (indicated by the power Rega logo disappearing after 5 seconds) before switching on
again, so that the self-test circuitry can complete its reset cycle.
8. Headphone Socket - 3.5mm stereo headphone jack.
9. Input Selection - To change between inputs, press the small black button located next to the row of input digits to cycle through 1-3. The
selected input is highlighted by the number lighting up in red. Input selection can also be changed with the remote.
10. Volume Control - The volume control has a minimum and maximum value which is indicated by the notch. The volume does not reset
after each use. Before plugging in headphones, make sure the volume is reduced.
7 8 9 10