ErgoAV ERTSS2-01B Manual De Instrucciones página 12

Supplied Hardware for Step 5A
For wooden table furniture/wood stud installation.
Screw M5X60mm
Z1
x2
Secure The Safety Straps With TV Stand Against The Wall
Note:
For the safest possible installation, we recommend using the included safety
straps. By doing so, you will greatly reduce the possibility of a TV Tip Over.
For wooden table furniture installation, follow STEP 5A.
For wood stud installation, follow STEP 5B.
For solid concrete or concrete block installation, follow
STEP 5C.
Step 5A
For Wooden Table Furniture Installation
●
DO NOT USE ANCHOR [Z2] FOR THIS STEP!
X Note: It is necessary to predrill a
pilot hole to avoid splitting the
wood. Being careful not to
damage your furniture.
Caution: The mounting surface
must be thicker than 1 in (25mm).
Pencil
(Not lncluded)
Phillips Screwdriver
(Not lncluded)
1 in (25mm) 1 in (25mm)
1/8 in (3mm) 1/8 in (3mm)
Screw M5X25mm
Z2
It is reccommended that the
safety straps be mounted at
least 12" apart.
x4
12
M5 Washer(BK)
Z3
x2
1/8 in (3mm)
X
Z2