ErgoAV ERTSS2-01B Manual De Instrucciones página 13

Step 5B
For Wooden Stud Installation
●
DO NOT USE ANCHOR [Z2] FOR THIS STEP!
X
● Any material covering the wall must not exceed 5/8 in (16 mm).
● Nominal wood stud size: common 2 x 4 in (51 x 102 mm) minimum 1½
x 3½ in (38 x 89 mm).
● Stud center must be verified by using an awl or stud finder.
Pencil
(Not lncluded)
Z3
Z1
OR
Awl
(Not lncluded)
Note: Each strap must be
mounted to a separate stud.
Stud Finder
(Not lncluded)
13
1/8 in (3mm)
1/8 in (3mm)
Wood Drill Bit
Phillips Screwdriver
(Not lncluded)