Bosch UniversalRotak 450 Manual Original página 13

Problem Possible Cause
Fuse faulty / blown
Grass too long
Motor protector has activated
Garden tool functions Extension cable damaged
intermittently
Internal wiring of garden tool defective
Motor protector has activated
Machine leaves ragged Height of cut too low
finish
Cutting blade blunt
and/or
Possible clogging
Motor labours
Blade fitted upside down
Blade not rotating Cutting blade obstructed
while garden product
switched on
Blade nut/bolt loose
Excessive vibrations/ Blade nut/bolt loose
noise
Cutting blade damaged
After-Sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The product, accessories and packaging should be sorted
for environmental-friendly recycling.
Bosch Power Tools
Corrective Action
If fuse blows continuously, please check your
electricity supply system or contact Bosch cus-
tomer service agent
Max. allowed grass height 30cm on highest
height-of-cut setting
Allow motor to cool and increase height of cut
Inspect cable, replace if damaged
Contact Bosch customer service agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace cutting blade (see figure I).
Check underneath the garden product and clear
out as necessary (always wear protective gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear protective gloves)
Tighten blade nut/bolt (22 Nm)
Tighten blade nut/bolt (22 Nm)
Replace cutting blade (see figure I).
Do not dispose of products into household
waste!
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, products that are no longer usable must be
collected separately and disposed of in an environmentally
friendly manner.
Français
Consignes de sécurité
Attention ! Lire avec attention toutes les instructions qui
suivent. Se familiariser avec les éléments de commande
et l'utilisation appropriée de l'outil de jardin. Conserver
les instructions d'utilisation à un endroit sûr pour pou-
voir les consulter ultérieurement.
Explication des symboles se
trouvant sur l'outil de jardin
Indications générales sur d'éventuels dangers.
Français | 13
1 609 92A 5W7 | (08.02.2023)