Publicidad
THANK YOU VERY MUCH FOR SELECTING OUR PRODUCT.
THIS
INSTRUCTION
OPERATING METHOD TO ENSURE PROLONGED SERVICE LIFE.
PLEASE READ AND COMPLETELY UNDERSTAND THIS MANUAL
BEFORE OPERATING THE LIFT TABLE. ALWAYS KEEP THIS
MANUAL AT AN APPROPRIATE PLACE. IF THE MANUAL OR
WARNING DECAL IS MISSING, PLEASE CONTACT WITH
DEALER.
Note: This Manual has been prepared for skilled and competent
personal. It provides instructions for using the product correctly and
parts list. This Manual cannot replace the professional skills and
expertise of the user.
1.
.
◇ Read & thoroughly understand the Instruction Manual
completely before using. Follow all safety instructions strictly.
◇ It is necessary to check all safety devices before operation.
◇ Make sure that there are no obstacles in the working area.
◇ Do not put foot or hand in scissors mechanism or through
frame.
◇ Screw the lifting eyes on the base frame before working on
the lift table.
◇ Do not overload the lift table. Load should be distributed on
the table according to relevant load distribution chart.
◇ Pay attention if local voltage and frequency is as same as the
input specification of the lift table.
◇ Use the lift table on flat and solid ground.
◇ All the electrical connection and disconnection operations
must be carried out by skilled and competent personal.
MANUAL
WARNING!
improperly, a person may be seriously injured.
Therefore, operate properly according to the
following instruction
DESCRIBES
If operating the lifting table
CORRECT
Publicidad
