Publicidad
■
Following table is recommended to service the lift table periodically.
Check oil level of oil tank
Check the cleanliness of oil filter
Fasten all the connecting parts again
Check wear and tear of pressure oil pipes
Check hydraulic cylinder
Fix main parts tightly again
Check the function of micro-switches
Check whole working state of the lift table
Lubricate all the joints and pivot points
Check wear and tear of all axial bushes
Replace hydraulic oil for the first time
Replace hydraulic oil
Check oil leaking
☆
Remark:
stands for proceeding the item.
8. GREASING POINTS
1.Piston rod bearing
2.Lower running wheel
3.Lower arm fixing
4.Arm center
5.Upper arm fixing
6.Upper running wheel
When greasing the bearings
the Lift Table must not be
loaded！When determining oil levels, bear in mind that the tank
contains the greatest amount when the lift table is in its lowest
position. Hydraulic oil must be treated as dangerous waste！
Content
After every 500 hours'
working or every 3
months later
☆
☆
☆
☆
☆
☆
☆
☆
☆
Accumulated working ten hours'
After every 2000
hours' working or
every year
☆
☆
☆
Publicidad
