Publicidad
This product is manufactured in accordance with the requirements of the
European Standards: EN 16120:2012+A2:2017 "Child use and care articles. Chair
mounted seat"; EN 71-1:2014+A1:2018 "Safety of toys. Part 1: Mechanical and
physical properties" and EN 71-2:2011+A1:2014 „Safety of toys. Part 2: Flmmability".
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING!
•
Never leave the child unattended.
•
Always use the restraint system and ensure it is correctly fitted.
•
Always use the chair attachment system and ensure it is correctly
fitted before use.
•
Always check the security and the stability of the product on the adult
chair before use.
•
Do not use this product on stools or benches.
•
This product is intended for children able to sit unaided (minimum 6
months) and up to 36 months or a maximum weight of 15 kg.
•
Be aware of the risk of tilting when your child can push its feet against
a table or any other structure. Make sure that the adult chair with the
chair mounted seat is placed in a position where the child is not able
to use its feet to push against the table or any other structure as this
can cause the tip over of the adult chair supporting the chair mounted
seat.
•
Do not use the chair mounted seat if any part is broken, torn or
missing.
•
Do not use accessories or replacement parts other than those supplied
or approved by the manufacturer. Otherwise, the booster chair may
lose stability.
•
The booster seat is only to be used with standard kitchen or dining
room chairs. Never use the booster seat on a tabletop, stool, swivel
chair, or any other seating surface where the straps can not be secured
properly.
•
This product is intended to be mounted on an adult chair with
minimum dimensions: backrest height 44 cm, seat length 32 cm, seat
width 33 cm.
•
Use the booster seat only for its intended purpose. Never use the
booster seat in motor vehicles as a car seat.
EN
16
Publicidad
