Publicidad
•
Do not use the product before making sure that all parts are in good
condition, correctly placed and fixed.
•
Be aware of the risk of open fire and other sources of strong heat in
the vicinity of the product.
•
The product should only be assembled and fit to adult chair by an
adult.
•
Never lift, move, fold, adjust or repair the seat when there is a child in
it. This can injure the child.
•
Do not make changes, improvements or modifications to the
construction, because this may risk the safety of your child. If a
problem arises during the use and operation with the product, contact
an authorized repair shop or the sales agent you bought the high chair
from for consultation or repairs.
IMPORTANT! The diagrams and figures in this instruction are illustrative and
indicative only. Check the securing of the fixation after each operation.
COMPONENTS - FIGURE 1
A. Booster seat; B. and C. Double tray (outer and inner parts); D. Toys for being
fitted on the tray surface (2pcs); E. Feet (4pcs).
BOOSTER SEAT ASSEMBLY – FIGURES 2, 3 and 4
Strictly follow the instructions and sequence for assembling the product as
shown in the diagrams.
WARNING! Make sure that the base is assembled correctly and is stable, this
ensures the safety of your child!
1. Installing of the booster seat's feet – See Figure 2.
Insert the four booster feet (E) into the allocated holes in the bottom of the
booster (A). Align the feet with the fixed grooves inside the holes when
inserting. To adjust the feet height press in the button and adjust feet to one
of the three heights available.
2. Fitting the tray – See Figure 3.
Slide the tray (B) onto the holders either side of the booster seat. The deeing
tray can be adjusted into 3 positions. Gently slide the tray back and forth until
desired position is chosen. Insert the inner tray (C) into the feeding tray.
Attention! Use the tray always in combination with safety belts! The tray is not
intended to protect the child from falling.
ASSEMBLY INSTRUCTIONS
17
Publicidad
