Publicidad
Idiomas disponibles
Idiomas disponibles
Note
Before commissioning, check the function of the device at a known
voltage source, e.g. on a known and safe 230 V voltage source or
on a known and safe 9 V battery. Select the correct measuring
range!
Disposal
Always dispose of packing materials in an environmentally friendly manner
and in accordance with the applicable local disposal regulations.
The icon with the crossed-out waste bin on waste electrical or electronic
equipment is taken from Directive 2012/19/EU. It states that this device must
not be disposed of with the household waste at the end of its life. You will find
collection points for free return of waste electrical and electronic equipment in
your vicinity. The addresses can be obtained from your municipality or local
administration. You can also find out about other return options that apply for
many EU countries on the website https://hub.trotec.com/?id=45090.
Otherwise, please contact an official recycling centre for electronic and
electrical equipment authorised for your country.
The separate collection of waste electrical and electronic equipment aims to
enable the re-use, recycling and other forms of recovery of waste equipment
as well as to prevent negative effects for the environment and human health
caused by the disposal of hazardous substances potentially contained in the
equipment.
In the European Union, batteries and accumulators must not be treated
as domestic waste, but must be disposed of professionally in accordance with
Directive 2006/66/EC of the European Parliament and of the Council of
6 September 2006 on batteries and accumulators. Please dispose of batteries
and accumulators according to the relevant legal requirements.
Only for United Kingdom
According to Waste Electrical and Electronic Equipment Regulations 2013
(SI 2013/3113) (as amended) and the Waste Batteries and Accumulators
Regulations 2009 (SI 2009/890) (as amended), devices that are no longer
usable must be collected separately and disposed of in an environmentally
friendly manner.
EN
Declaration of conformity
We – Trotec GmbH – declare in sole responsibility that the product
designated below was developed, constructed and produced in compliance
with the requirements of the EU Radio Equipment Directive in the version
2014/53/EU.
Product model / Product:
Product type:
Year of manufacture as of:
Relevant EU directives:
•
2011/65/EU
•
2012/19/EU
•
2014/30/EU
•
2015/863/EU
Applied harmonised standards:
•
EN 300 328 V2.2.2
Applied national standards and technical specifications:
•
Regulation (EC) 1907/2006
•
EN 61326-1:2013
•
EN 61326-2-2:2013
•
IEC 61000-4-4:2012
•
EN IEC 61000-4-2:2008
•
EN IEC 61000-4-3:2010
•
EN IEC 61000-4-8:2009
•
IEC 62321-3-1:2013
•
IEC 62321-4:2013
•
IEC 62321-5:2013
•
IEC 62321-6:2015
•
IEC 62321-7-1:2015
•
IEC 62321-7-2:2017
•
IEC 62321-8:2017
Manufacturer and name of the authorised representative of the technical
documentation:
Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: info@trotec.de
Place and date of issue:
Heinsberg,
17.02.2023
Joachim Ludwig, Managing Director
Digitales True-RMS-Multimeter BE52
BE52
digital true RMS multimeter
2022
9
Publicidad
