GB
Operating instructions
ITWT-800
Scene 3 is taught in by pressing 3x; the LED will light up green 3x and orange 3x.
If all 3 scenes have been saved, move the slider to position 2.
Press accordingly to activate each scene.
1x for scene 1 the LED will light up orange 1x as confirmation
2x for scene 2 the LED will light up orange 2x as confirmation
3x for scene 3 the LED will light up orange 3x as confirmation
To turn of all scenes, simply press and hold for longer (approx. 2 secs), the LED will light up red 2x.
If further ITWT-800 (or ITKL-30 or ITF-100, for example) wireless wall transmitters are to be used
for scene switching, the additional transmitters only have to be taught in to the wireless receivers
as this will synchronise the scenes automatically.
Mounting (Fig. 5)
Easy-to-install mounting plate.
The mounting plate is easy to affix on glass, wood, wallpaper or tiles, etc.
Double-sided adhesive tape and screws are included.
Caution: Avoid shielding through metal objects.
Each time the battery is replaced or the wall transmitter is moved to another location or mounted,
the wall transmitter calibrates itself for the touch sensitivity.
This process takes 16 seconds. It should ensure that the touch sensitivity reacts correctly on
different surfaces such as wood, metal, concrete, etc.
Please do not touch or move the wall transmitter during the calibration period before the
calibration is complete.
Safety instruction
Do not ingest batteries, risk of burning due to dangerous substances.
This product contains a button cell battery. If the button cell battery is swallowed, severe internal
burns can occur within just 2 hours and cause death. Keep new and used batteries out of the reach
of children. If the battery compartment does not close securely, do not use the product and keep it
away from children. If you think that batteries have been swallowed or are in any part of the body,
seek medical attention immediately.
To view the Declaration of Conformity, please visit www.intertechno.at/CE
›