Bugatti UMA Instrucciones Para El Uso página 12

Tare/ Set Button
In scale mode:
The Tare /Set Button allows you to add n' weigh each additional item without removing
from the bowl. Press the button to reset the scale to zero. (max 3 Kg)
In timer mode:
Press the button to set the timer.
LED Backlight
The LED backlight will be on when the scale is switched on. The light will be switched off
automatically after the weight reading is steady for 10 seconds.
FUNCTION
Weighing
Place the scale on flat and firm surface - this is essential for correct measurement.
Press ON/OFF button to switch on the scale. As soon as '0' appears, the scale
is ready for use.
The maximum weighing capacity of the scale is 3 KG. The display will show 'Err' when the
scale is overload.
Warning: Continuous excessive overload may damage the weighing function!!!
Tare Function
After weighing the first item on the scale and with the item remaining on the scale, press
the button to reset the scale to zero. You may then add the second item on
the scale and it will show the weight of the second item only. You may repeat the same
steps for weighing consecutive items.
Auto-Off Function
You may switch off the scale at any time by pressing the ON/OFF button and
hold for 3 seconds. In order to prolong the battery life, the scale will be switched off
automatically when:
(a) the weight reading is steady for about 180 seconds.
(b) the scale is not in use for 60 seconds
6