Publicidad
SI M P LE SE LE CT
PRESSURE BALANCE VALVE TRIM
REGULADOR DE VÁLVULA DE PRESIÓN BALANCEADA DE SELECCIÓN SIMPLE
GARNITURE POUR VANNE DE RÉGULATION DE PRESSION
SKU: 948975, 948977, 948976, 948974, 948973, 948978
1
1
2
2
5. Holding escutcheon (2) in place, tighten mounting
nut (3) onto the backplate (1).
5. Mantenga la placa (2) en posición y asegure la tuerca
de montaje (3) en la placa (1).
5. En maintenant la rosace (2) en place, serrer l'écrou de
montage (3) sur la plaque arrière (1).
Steps:
Please update all
steps with pertinent
words.
3
6. Water test:
Turn on water lines. Press button 1 and 2 allowing
water to flow from outlets. If the issues occur, go
back to step 3 and re-install. (Before reinstalling, be
sure to turn the adjusting bolts counterclockwise
to the minimum position and put the stop plugs in
original position.)
Issue a: Button cannot bounce smoothly. (The
adjusting bolts in step 3 cannot rotate to the limit
position.)
Issue b: There is no flow from outlets or button
cannot be switched. (The adjusting bolts in step 3 is
too tight.)
4
1
2
1.800.221.3379
Publicidad
