Publicidad
Idiomas disponibles
Idiomas disponibles
FR
WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
The Casselin company declines all responsibility in the event of non-compliance with the safety, hygiene and
electrical standards in force when using the device.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging and the protections must be completely removed.
Place the device on a solid, stable, flat and non-flammable surface.
Place the device under an extractor hood.
Do not lean the device against the wall. In the event of a short distance from a wall, ensure that the latter
resists a minimum temperature of 90°C.
Do not install the device near open fires or other heating devices.
It is forbidden to place flammable objects on or near the device.
Make sure that all ventilation openings are not blocked.
Make sure the device is positioned for optimal use.
The device must be electrically protected upstream with an appropriate safety device.
The device must be plugged directly into a wall socket and not into a power strip.
Let the appliance warm up for 15 minutes before first use.
USE
Before first use, the device must be cleaned with a damp cloth and mild detergent and dried completely.
Lower part :
Switch on the device using the main switch. The green power-on indicator light comes on.
Turn the thermostat knob to the desired temperature. The orange indicator light comes on when the
resistances heat up and goes off when the desired temperature is reached. To turn off the appliance, position
the thermostat button on "0" and press the main switch.
After use, allow the device to cool down.
Check and empty the grease trap regularly.
The top part :
Switch on the device using the main switch which lights up green when the power is turned on.
Turn the thermostat knob to the desired temperature. The orange indicator light comes on when the
resistance heats up and goes off when the desired temperature is reached. To turn off the appliance, position
the thermostat button on "0" and press the main switch.
After use, allow the device to cool down.
Publicidad
