Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INFORMATION
Make sure you have the correct plugs before mounting the wall bracket.
Do not mount this product on drywall.
▶Distance min/max from the wall: 7,2-41cm
▶Swivel arm angle, left/right: 120º
▶Tilt angle: -5º/+15º
PARTS INCLUDED
A. Fixing bolt M6x40 (4x)
B. Plug M8x40 (4x)
C. Fixing screw M5x20 (4x)
D. Set screw M6x20 (4x)
E. Fixing screw M4x20 (4x)
F. Washer (8x)
H. Fixing key (1x)
WARNINGS
▶Pay special attention to safety during the installation process of
heavy objects
▶This bracket is only suitable for flat screen TVs
▶Keep children away during installation
Note
In order to avoid accidental damage or injury, it
is recommended that this product be installed by
a professional. The supplier is exempt from any
responsibility for damages or injuries caused by improper
installation.
INSTALLATION
1. Use the wall bracket as a template to drill three holes in
the wall with a depth of Ø10 mm and 50 mm. Insert three
plastic anchors into the holes.
2. Place the bracket on the wall and screw three self-screws
into the plastic anchors to secure the bracket to the wall.
Instruction manual
A.
B.
C.
D.
E.
F.
G.
H.
3. Install the TV on the fixed base using the supplied screws,
which you will find in the bag of supplied parts.
4. Loosen the fixing knob a little to adjust the angle of the TV
between
degrees until you get the right position.
-15º / + 15º
Then firmly secure the fixing knobs.
DRYWALL INSTALLATION
Use a stud finder to locate two adjacent studs where you want to install.
your mount. Use the wall plate as a template to mark four holes.
Drill a pilot hole at each marked location.
Secure the wall plate to the wall using the concrete anchors and lag
screws provided.
ref. 50141
ES
PT
EN
FR
Publicidad
