LOGISTY L2612 Manual Del Usuario página 26

Selecting programmable options
Carry out a test with the control panel by pressing the
G
"Reprogrammable" key (in the case of Alert call, Silent
alarm and Audible signal or Stay Arm only).
Press the Prog. key and check that the system res-
G
ponds according to the programmed function.
Key "Prog."
of the remote control
Alert call
Silent alert
Audible signal
Stay arm
You have transferred a specific code to the Prog. key on
GB
the remote control.
Note the chosen options on the memory aid at the
G
end of the use guide.
Voice message
of the control panel
"Beep, Alert call"
"Beep, Silent alert"
"Beep beep beep beep"
"Beep, Stay arm"
Changing the batteries
If the light indicator is faint when you press a key,
change the remote control batteries (2 x lithium flat bat-
teries type 2016).
Installation radio code and Prog. key code programming
is not lost when the batteries are replaced.
Batteries
26
Li