Publicidad
Idiomas disponibles
Idiomas disponibles
◾
Use extreme caution when cutting brush and saplings. The slender material
may catch the blade and be whipped toward you or pull you off balance.
◾
Maintain control of the machine and do not touch cutters, lines or blades
and other hazardous moving parts while they are still in motion. This
reduces the risk of injury from moving parts.
◾
Carry the machine with the machine switched off and away from your body.
Proper handling of the machine will reduce the likelihood of accidental contact
with a moving cutter, line or blade
◾
Only use replacement cutters, lines, cutting heads and blades specified by
the manufacturer. Incorrect replacement parts may increase the risk of breakage
and injury.
◾
When clearing jammed material or servicing the machine, make sure the
switch is off and the battery pack is removed. Unexpected starting of the
machine while clearing jammed material or servicing may result in serious
personal injury.
◾
Damage to Trimmer - If you strike a foreign object with the trimmer or it
becomes entangled, stop the tool immediately, check for damage and have any
damage repaired before further operation is attempted. Do not operate with a
broken guard or spool.
◾
If the equipment should start to vibrate abnormally, stop the motor and
check immediately for the cause. Vibration is generally a warning of trouble. A
loose head may vibrate, crack, break or come off the trimmer, which may result
in serious or fatal injury. Make sure that the cutting attachment is properly fixed
in position. If the head loosens after fixing it in position, replace it immediately.
Never use a trimmer with a loose cutting attachment.
◾
Use Only With The 56V Lithium-Ion Power Head PH1400/PH1400-FC/PH1420/
PH1420-FC.
NOTE: SEE YOUR POWER HEAD OPERATOR'S MANUAL FOR
12
STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC
ADDITIONAL SPECIFIC SAFETY RULES.
SAVE THESE INSTRUCTIONS!
Publicidad
