RocketFish RF-HTMF19 Guía De Ensamblaje página 11

STEP 3 - Attach the horizontal brackets to your TV
CAUTION: To avoid personal injury or property damage, do not use power tools.
1 Align the holes you noted on the horizontal brackets (04) with the screw holes
on the back of your TV.
2 Place the washers (
holes on the back of your TV, then insert the screws that you selected in
STEP 2 ( ) through the washers. Make sure that the brackets are level.
01
3 Add spacers (03) if you determined that spacers are required in STEP 1.
4 Tighten the screws until they are snug against the brackets. Do not over tighten.
You'll need
OR
OR
OR
OR
01 Screws (4)
) over the holes in the brackets that align with the screw
02
OR
OR
Phillips screwdriver
02 Washers (4)
03 Spacers (4)
RF-HTMF19
04 Horizontal TV
brackets (2)
11