RocketFish RF-HTMF19 Guía De Ensamblaje página 14

STEP 6 - Option 1: Install on a wood stud wall
1 Locate the stud, then verify the center of the stud with an edge-to-edge stud
finder or an awl.
Caution:
Drywall covering the wall must not exceed 5/8 in. (1.6 cm).
Minimum wood stud size: nominal 2 × 4 in. (5.1 × 10.2 cm) actual 1 1/2 × 3 1/2 in. (3.8 × 8.9 cm).
You'll need
07 Mounting
template
09 Lag screw (2)
14
08 TV arm assembly
10 Washer (2)
7/32" wood drill bit
1/2" socket wrench
Level
Awl
Drill
Tape
Edge-to edge
stud finder