Helo HNST1 Instalación Y Manual De Uso página 48

User and installation manual HNS-T1
Steame generator
Safety valve installation
The safety valve is installed on the steam pipe with using the provided ½" T connector.
A separate downpipe directly to a drain or to the floor is installed on the safety valve. NOTE: Safety valve's downpipe
must not be connected to the steam generator's draining pipe or the steam pipe.. Use the provided sealing tape or
similar sealing on the threads.
Filling tube for the
deliming agent
Steam pipe ½"
Plug for the electromagnetic
flushing valve
Water draining, 1/2"
Manual or electric valve
All manuals and user guides at all-guides.com
Image. Installation of the safety valve and the automatic drain valve
7
Water connection, ¾"
Main switch
Strain relief clamp for
the control panel cable
Strain relief clamp for the
Heater connection cable