WARNING
Excessive Weight Hazard
Use two or more people to move and install bottles.
Failure to do so can result in back or other injury.
1. Press the power button located on the front of the water
cooler.
2. Unplug water cooler or disconnect power.
3. Remove the water bottle from the water cooler.
4. Remove the cap from a new water bottle.
5. Turn the water bottle over and place opening into reservoir on
water cooler.
6. Ensure that the water bottle is lying firmly on the water cooler.
If not, reposition the water bottle until it is firmly seated.
7. Wait 5 minutes and then check to see that water flows easily
from all taps.
WARNING
Excessive Weight Hazard
Use two or more people to move and install bottles.
Failure to do so can result in back or other injury.
Cleaning the Exterior
In most cases, regular use of a soft, damp cloth or sponge and a
mild detergent, or any nonabrasive household cleaner, is all that
is necessary to keep the outside of your water cooler looking nice
and clean.
Cleaning the Interior
Follow these steps when first using your water cooler and during
regular cleaning operations. It is recommended that you clean
and sanitize the interior every 2 months.
Wash
1. Press the power button located on the front to turn off the
water cooler.
2. Remove the bottle.
10
Changing a Water Bottle
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
8. Plug into a grounded 3 prong outlet.
9. Press the power button located on the front of the water
WATER COOLER CARE
Cleaning
3. Using containers large enough to collect all water, empty the
4. Remove the baffle from the water cooler.
WARNING
Electrical Shock Hazard
cooler.
reservoir through the faucets.
A. Turn baffle supply collar counterclockwise and lift to
remove.
B. Turn baffle counterclockwise and lift to remove.
A
B
C
D
A. Baffle supply collar
B. Baffle
C. Water reservoir
D. Power button