Publicidad
Idiomas disponibles
Idiomas disponibles
To operate model WHKM-D30
A
I
A. Power ON/OFF button
B. SET - CLOCK button
C. Cold water operation icon
D. Hot water operation icon
E. TIMER icon
F. Clock display
Press the power button to turn power on to the water cooler. When power is first supplied to the water cooler, the cold (snowflake) and
hot (teacup) operation icons will flash and the clock will be set to 12:00 AM.
Clock
To set the clock:
1. Press SET - CLOCK button. The minutes will begin flashing.
2. Press the feature adjustment buttons, + and –, to set the
minutes.
3. Press SET - CLOCK again so the hour begins flashing.
4. Press the feature adjustment buttons, + and –, to set the hour.
5. Press SET - CLOCK again to exit the clock set mode.
Energy Saving Mode
Energy saving mode is designed to save energy by shutting the
water cooler on and off at pre-set times.
To turn on the energy saving mode, press the energy saving OFF/
ON button. The energy saving icon will light up, indicating the
energy saving mode is on.
To turn off the energy saving mode, press the energy saving OFF/
ON button so that the energy saving icon is no longer visible.
To set the energy saving mode start time:
1. Press SET - ENERGY button. The energy saving icon and
START icon will light up and the minutes will begin to flash.
2. Press the feature adjustment buttons, + and –, to set the
minutes when you want the water cooler to turn on (usually
set for sometime in the early morning).
3. Press SET - ENERGY again so that the hour begins to flash.
4. Press the feature adjustment buttons, + and –, to set the hour.
B
C
J
K
L
G. Feature adjustment and
Control Lock buttons
H. TIMER button:
I. Night light button
J. SET - ENERGY button
K. SET - TEMP button
D
E
F
M
N
O
To set the energy saving mode stop time:
1. Press SET - ENERGY button so that the energy saving icon
and STOP icon light up and the minutes begin to flash.
2. Press the feature adjustment buttons, + and –, to set the time
when you want the water cooler to turn off (usually set for
sometime late at night).
3. Press SET - ENERGY again so the hour begins to flash.
4. Press the feature adjustment buttons, + and –, to set the hour.
5. Press SET - ENERGY again to leave the energy saving set
mode.
Setting the Temperature
To set the temperature of the hot and cold water:
1. Press SET - TEMP button. The hot water icon and
temperature setting will flash.
2. Press the feature adjustment buttons, + and –, to set the hot
water temperature. The temperature ranges from hot (one
bar) to hottest (three bars).
3. Press SET - TEMP button again so the cold water icon and
temperature setting are flashing.
4. Press the feature adjustment buttons, + and –, to set the cold
water temperature. The temperature ranges from cold (one
bar) to coldest (three bars).
5. Press SET - TEMP button again to exit the temperature set
mode.
NOTE: During normal operation of the water cooler, the cold
water icon and/or the hot water icon will flash when the unit is
cooling or heating the water.
G
P
L. Temperature setting display
M. Control panel lock icon
N. Energy saving icon
O. Energy saving operation START icon.
P. Energy saving operation STOP icon
Q. Energy saving ON/OFF button.
H
Q
7
Publicidad
