Gude GKM 650 Traducción Del Manual Original página 13

Emergency Action
Apply the first aid adequate to the injury and get
qualified medical assistance as quickly as possible.
Protect the injured person from more accidents and
calm him/her down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be fitted with a first-aid
kit. It is essential to replace any used material in the
first-aid kit immediately after it has been used. If you
seek help, state the following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Use as designated
Sweeping of flat and dry surfaces – e.g. entries,
terraces, courtyards, etc.
Disposal
The disposal instructions are based on icons on
the appliance or its package. The description of all
meanings can be found in the "Marking" Chapter.
Transport package disposal
The package protects the appliance against any
damage during transport. Package materials are usually
chosen according to their environment friendliness and
disposal method and can therefore be recycled.
Putting the package into material circulation saves raw
materials and reduces waste disposal costs.
Parts of the package (e.g. foils, styropor) can be
dangerous to children. Risk of suffocation!
Keep parts of the package out of reach of children and
dispose them as quickly as possible.
Handling requirements
The operating staff must carefully read the Operating
Instructions before using the appliance.
Qualification
Apart from the detailed instruction by a professional
no special qualification is necessary for using the
appliance.
.
Transport and storage
For any longer storage the appliance must be
thoroughly cleaned and stored so as unauthorised
persons could not access it.
-
Empty the dirt collecting container
-
Adjust the brushes to relieve them
-
Store the appliance when it is dry
-
To save spaces, the sliding handle can be
folded. Loosen the screws, pull the sliding
handle out and fold forward.
Assembly
When putting the appliance into working order, it is
enough just to fold up the sliding handle and tighten
the screws included in the supply.
Now adjust the sliding handle height. Loosen the
screws, select the required fixture and fix the sliding
handle in the desired height.
Operation
Remove the accessories from the collection container
and check that they are complete.
Guide the feed brushes onto the corresponding axles
and fasten each of them with 3 screws (Fig. 2).
Attach the lower part of the push bar to the mounting
points provided (Fig. 3). Use the clamping knurled
screws on both sides here (fig. 4).
Attach the upper part of the push bar as shown in fig. 6.
Emptying the dirt collecting container
If you want to take out the dirt collecting container to
empty it, take it by its handle and pull up.
If metal, glass or sharp objects have been swept, it is
necessary to use firm working gloves when emptying
the dirt collecting container.
Inspections and maintenance
Use a wet cloth for plastic parts cleaning. Do
not use any cleaning agents, solvents or sharp objects.
After every use
Remove the appliance off dust and dirt.
Empty the dirt collecting container.
Except the above, the appliance needs not be
maintained any further.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your
device in case of complaint, please indicate serial
number, order number and year of manufacture. All
information is available on the product label. To have
all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
ENGLISH
13